■ Tšobotsi :
Re ikitlaelletsa ho ba ba phethahetseng ka botlalo.
Khetho e thata ea karolo ka 'ngoe, ho kenyeletsoa thepa le likarolo tse ling tse setseng.
ts'ebetso e ntle ea khoele le coil li phethahatsa boleng bo phahameng ba li-valve tsa solenoid.
Hlokomela :
Khoele ea NPT e ka hlophisoa.
Mohlala | 4M110-M5 | 4M110-06 | 4M210-06 | 4M210-08 | 4M310-08 | 4M310-10 | 4M410-15 | |
4M120-M5 | 4M120-06 | 4M220-06 | 4M220-08 | 4M320-08 | 4M320-10 | 4M420-15 | ||
Media Media | Moea | |||||||
Mokhoa oa ho etsa | Mofuta oa Pilot ea ka hare | |||||||
Boemo | 5/2Poso | |||||||
Lubrication | Ha ho hlokahale | |||||||
Khatello ea Mosebetsi | 0.15 ~ 0.8Mpa | |||||||
Khatello ea Bopaki | 1.0Mpa | |||||||
Mocheso oa Mosebetsi | 0 ~ 60℃ | |||||||
Range ea Voltage | ±10% | |||||||
Tšebeliso ea Matla | AC:2,8VA DC:2.8W | AC:5,5VA DC:4.8W | ||||||
Sehlopha sa Insulation | Boemo ba F | |||||||
Sehlopha sa Tšireletso | IP65(DIN40050) | |||||||
Mofuta oa Khokahano | Mofuta oa terminal | |||||||
Max.Operating Frequency | 5Cycle/Sec | |||||||
Min. Nako ea Boithabiso | 0.05Sec | |||||||
Lintho tse bonahalang | 'Mele | Aluminium Alloy | ||||||
Tiiso | NBR |
Mohlala | 4M110-M5 | 4M110-06 | 4M210-06 |
4M120-M5 | 4M120-06 | 4M220-06 | |
Sectional Area e Atlehang | 5.5mm^2(Cv=0.31) | 12.0mm^2(Cv=0.67) | 14.0mm^2(Cv=0.78) |
Boholo ba Boema-kepe | Kenyeletso=Sehlahisoa=Boema-kepe ba Mohaho=G1/8 | Kenyeletso=Sephetho=G1/8 | Kenyeletso=G1/4Output=G1/8 |
Mohlala | 4M210-08 | 4M310-08 | 4M310-10 | 4M410-15 |
4M220-08 | 4M320-08 | 4M320-10 | 4M420-15 | |
Sectional Area e Atlehang | 16.0mm^2(Cv=0.89) | 25.0mm^2(Cv=1.40) | 30.0mm^2(Cv=1.68) | 50.0mm^2(Cv=2.79) |
Boholo ba Boema-kepe | Kenyeletso=Sephetho=G1/4 | Kenyeletso=G3/8Output=G1/4 | Kenyeletso=G3/8,Exhaust Port=G1/4 | Input=Sephetho=G1/2 |